Wiring runs, transformer capacity, and fixture placement are settled on paper by an outdoor lighting company in Marengo, IL well before anyone digs, and they are difficult to revise once the beds are planted and the patio is set. Lighting is the system most often added last and the one that suffers most for it.
When Marc Bolanos graduated high school in 2001, he and his father, Miguel Bolanos, founded M.A.B. Landscape Group.
The family-owned company has since shifted its focus solely to landscape design and build, which means the lighting layout is drawn alongside the patios, walls, and plantings it serves.
Here is what gets decided at the design stage, and why those choices are hard to undo later.
Related: How Outdoor Lighting Changes the Way a Backyard Lives After Dark in Marengo, IL
Why Does Outdoor Lighting Belong in the Original Landscape Design?
Outdoor lighting belongs in the original design because low voltage cable wants to run in the same trenches as irrigation sleeving and under hardscape before it is laid. That only happens if the lighting plan exists while the ground is open.
Added afterward, the cable has to find a route around finished work. That is how yards end up with wire visible along a bed edge, or with fixtures clustered where the cable could reach rather than where the light was wanted.
How Is Landscape Lighting Transformer Size Determined?
Transformer capacity is set by the combined load of the fixtures plus headroom for additions.
Sizing it to the first phase alone is a common and expensive shortcut, because a property that later adds path lighting along a new walk finds the transformer already at capacity.
A transformer sized for the full plan rather than the first installment costs a little more at the outset. It saves pulling a second transformer in two years.
What Should Be Lit on a Northern Illinois Property?
Steps, grade changes, and the path between the drive and the door should be lit first, because those are safety rather than aesthetics. After that, the decisions are about composition.
A mature oak uplit from two sides, a stone wall grazed from below, or a specimen planting given its own fixture each earns attention.
Lighting a few things properly reads better than lighting the whole property evenly.
Related: What an Outdoor Living Contractor in Marengo, IL Coordinates on a Multi-Element Build
How Do Outdoor Lighting Fixtures Hold Up Through an Illinois Winter?
Cast brass and copper fixtures handle freeze and thaw and the salt that comes with a plowed driveway, and they patina rather than corrode.
Thin aluminum and plastic housings crack at the lens seal within a few seasons here.
Mounting height and stake depth matter as much as the fixture. A unit set shallow in a bed heaves out of position over a winter and spends the spring pointing at the sky.
What Does Landscape Lighting Need by Way of Upkeep?
Landscape lighting needs lens cleaning, stakes reset after a hard freeze, and aiming revisited as planting matures around the fixtures. A plan drawn for a young landscape stops working once the shrubs have grown into the beams.
A layout drawn with that growth anticipated leaves room to re-aim rather than relocate as a planting fills in.
The energy-efficient LED systems we install also switch on and off from an app on your phone, so adjusting when the lights run takes no trip outside.
Can a Landscape Lighting Plan Be Installed in Stages?
A landscape lighting plan is often installed in stages on a larger property, and that is frequently the sensible route.
The cable runs and the transformer are sized for the finished plan, then fixtures are added area by area as budget and planting allow.
What matters is that the infrastructure goes in once. Pulling a second cable run two years later through established beds is the expensive version of the same outcome.
Bring an Outdoor Lighting Company in Marengo Into the Design Early
If a project is in design now for spring, the lighting plan belongs in the same drawing as the hardscape and the planting rather than in a conversation next summer.
Our 3D design renderings let you see the patios, walkways, and planting beds before installation, and the lighting belongs on that same drawing.
M.A.B. Landscape Group designs and installs long-lasting, energy-efficient LED outdoor lighting as part of its landscape design and build work across Marengo, Lakewood, Algonquin, and the surrounding communities.
Schedule your outdoor lighting consultation with M.A.B. Landscape Group.
In Summary
Can landscape lighting be added to a finished yard in Marengo, IL?
Landscape lighting is routinely added to finished yards in Marengo, IL. The constraint is cable routing, which has to run around established beds and under existing hardscape, so the layout is shaped partly by what the ground will allow.
How much of a property should be lit?
Less of a property should be lit than most people expect. Safety routes come first, then two or three features worth drawing the eye to, because evenly lighting everything flattens a landscape and raises the running cost for no visual gain.
Do LED fixtures change the landscape lighting design?
LED fixtures change the electrical load, which usually means a smaller transformer or more room on the same one, while the placement principles behind a good layout stay the same. M.A.B. Landscape Group installs LED systems that you switch on and off from a mobile app.
Related: Custom Fire Pits in Marengo, IL: Shape, Fuel and How Far Apart People Sit